INSPECTOR - EandI UMBILICAL And CABLE LAYING

Job Description

Inspector - E&I (Umbilical & Cable Laying)

Location:

Abu Dhabi, Other/Not Applicable, AE

Type of contract: Permanent

Posting date: 9 Nov 2026

Job offer reference: 218719

Qualifications:

• Degree in Electrical Engineering/ Instrumentation or Control Engineering
• Minimum of 10 years’ experience in Oil & Gas and Petrochemical Industries as an inspector in the construction of new and Brownfield modifications to existing 33 KV,11kV, 3.3 kV and 415 V electric power distribution systems, switchgear, control gear, distribution boards, UPS, earthing & lighting, underground cabling & Umbilical cable laying expirience, cathodic protection, lighting and small power distribution systems.
• Must be experienced in interpreting and applying EPC Contractor and Vendor design documentation in the construction, testing and commissioning of all instrumentation and control systems in DCS including modifications to the existing ESD, Fire and Gas systems and control room architecture and provision of new package boiler instrumentation systems.
• Proved experience in liaising with EPC Contractors, Manufacturers and Client representatives during the FAT and SAT of electric equipment.
• Good knowledge of ISO and other International Standards.
• Fluency in English.
  
  

Responsibilities:

• Attendance at all Inspections with client and EPC Contractor representatives of 33Kv,11kV, 3.3 kV and 415 V AC power distribution, instrument installations, Switchgears, control gear, cathodic protection, HVAC system, 11oV AC UPS, 24V DC UPC and associated systems.
• Prepare / review method statements and ITPs in coordination with QA/QC Engineers and Project Engineers.
• Prepare QA/QC reports regarding inspections, material and nonconformance issues.
• Verify all necessary corrective actions are carried out.
• Check all drawings and documents used at site for approval status and compliance with project requirements.
• Function test of control valves, SDV and ESDVs.
• Ensure all equipment and special tools are available and suitably calibrated with valid certificates.
• Attendance at FAT and SAT of all HV and LV electrical equipment.
• Quality control of electrical materials received at site.
• Ability to prepare concise weekly and monthly inspection reports.
  
  

READY TO LEAVE YOUR MARK IN A SMARTER SOCIETY?

Qualifications:

• Degree in Electrical Engineering/ Instrumentation or Control Engineering
• Minimum of 10 years’ experience in Oil & Gas and Petrochemical Industries as an inspector in the construction of new and Brownfield modifications to existing 33 KV,11kV, 3.3 kV and 415 V electric power distribution systems, switchgear, control gear, distribution boards, UPS, earthing & lighting, underground cabling & Umbilical cable laying expirience, cathodic protection, lighting and small power distribution systems.
• Must be experienced in interpreting and applying EPC Contractor and Vendor design documentation in the construction, testing and commissioning of all instrumentation and control systems in DCS including modifications to the existing ESD, Fire and Gas systems and control room architecture and provision of new package boiler instrumentation systems.
• Proved experience in liaising with EPC Contractors, Manufacturers and Client representatives during the FAT and SAT of electric equipment.
• Good knowledge of ISO and other International Standards.
• Fluency in English.
  
  

Responsibilities:

• Attendance at all Inspections with client and EPC Contractor representatives of 33Kv,11kV, 3.3 kV and 415 V AC power distribution, instrument installations, Switchgears, control gear, cathodic protection, HVAC system, 11oV AC UPS, 24V DC UPC and associated systems.
• Prepare / review method statements and ITPs in coordination with QA/QC Engineers and Project Engineers.
• Prepare QA/QC reports regarding inspections, material and nonconformance issues.
• Verify all necessary corrective actions are carried out.
• Check all drawings and documents used at site for approval status and compliance with project requirements.
• Function test of control valves, SDV and ESDVs.
• Ensure all equipment and special tools are available and suitably calibrated with valid certificates.
• Attendance at FAT and SAT of all HV and LV electrical equipment.
• Quality control of electrical materials received at site.
• Ability to prepare concise weekly and monthly inspection reports.
  
  

Qualifications:

• Degree in Electrical Engineering/ Instrumentation or Control Engineering
• Minimum of 10 years’ experience in Oil & Gas and Petrochemical Industries as an inspector in the construction of new and Brownfield modifications to existing 33 KV,11kV, 3.3 kV and 415 V electric power distribution systems, switchgear, control gear, distribution boards, UPS, earthing & lighting, underground cabling & Umbilical cable laying expirience, cathodic protection, lighting and small power distribution systems.
• Must be experienced in interpreting and applying EPC Contractor and Vendor design documentation in the construction, testing and commissioning of all instrumentation and control systems in DCS including modifications to the existing ESD, Fire and Gas systems and control room architecture and provision of new package boiler instrumentation systems.
• Proved experience in liaising with EPC Contractors, Manufacturers and Client representatives during the FAT and SAT of electric equipment.
• Good knowledge of ISO and other International Standards.
• Fluency in English.
  
  

Responsibilities:

• Attendance at all Inspections with client and EPC Contractor representatives of 33Kv,11kV, 3.3 kV and 415 V AC power distribution, instrument installations, Switchgears, control gear, cathodic protection, HVAC system, 11oV AC UPS, 24V DC UPC and associated systems.
• Prepare / review method statements and ITPs in coordination with QA/QC Engineers and Project Engineers.
• Prepare QA/QC reports regarding inspections, material and nonconformance issues.
• Verify all necessary corrective actions are carried out.
• Check all drawings and documents used at site for approval status and compliance with project requirements.
• Function test of control valves, SDV and ESDVs.
• Ensure all equipment and special tools are available and suitably calibrated with valid certificates.
• Attendance at FAT and SAT of all HV and LV electrical equipment.
• Quality control of electrical materials received at site.
• Ability to prepare concise weekly and monthly inspection reports.
  
  

Job Details

Role Level: Not Applicable Work Type: Full-Time Country: United Arab Emirates City: Abu Dhabi Company Website: Job Function: Operations Management Company Industry/

Sector: Other

What We Offer

About The Company

Searching, interviewing and hiring are all part of the professional life. The TALENTMATE Portal idea is to fill and help professionals doing one of them by bringing together the requisites under One Roof. Whether you're hunting for your Next Job Opportunity or Looking for Potential Employers, we're here to lend you a Helping Hand.

Report

Disclaimer: talentmate.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at [email protected].