Power Production Technician
Amentum
Date: 2 weeks ago
City: Abu Dhabi
Contract type: Full time

Purpose and Scope:
The Contractor shall provide OM&R support for all generators, automatic transfer switched (ATS), synchronization gears and light carts, refueling support services to enable refueling of all operational generators on an ongoing basis. The Contractor shall provide inspections, maintenance as required. In addition, the Contractor shall perform facility management and maintenance and repair for fuel systems supporting facility stationery and emergency back-up generators.
Essential Responsibilities:
The Contractor shall use all USG provided generators, transformers, switchgears, fuel tanks, cabling and any other equipment needed to support the government’s requests of spot generators providing prime power for mission requirements. Additionally, in order to minimize mission impact due to power outages caused by routine maintenance or unexpected equipment failure, the Contractor shall utilize USG provided back-up generators to meet the performance objectives of providing reliable and continuous prime power support and no scheduled power outages longer than one (1) hour.
The Contractor shall:
Install, remove, and operate electrical power generating and control systems, automatic or manual transfer switches and associated equipment with proper technical skills.
Check equipment for serviceability; position equipment such as gasoline and diesel engines, generators, switchgear, air compressors, and other power generating auxiliary equipment.
Check installed equipment to ensure compliance with publications, policies, and directives.
Inspect, test, and service component systems such as safety, fuel, lubrication, cooling, and air pressure, pumps, regulators, governors, and accessory equipment.
Observe and interpret instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.
Adjust engine generator systems to maintain proper voltage, current, frequency, and synchronization; synchronize multiple generators when needed.
The Contractor shall operate medium and low voltage generators as required. Operations of the electric generators include start-up, transfer of load, generation, and shutdown of all associated electric power equipment. Operations responsibilities include monitoring and adjusting generator and electrical output performance as required; ensuring adequate stores of fuel are available for continuous operation of the plants; switching operating generators to maintain electrical output while permitting servicing on generators taken off line. Duties include observation of key and critical operational parameters and taking appropriate measures in the event of out-of-tolerance conditions. For locations where generators are providing prime power, performance of these duties must be on a 24-hour a day, 7-day week shift schedule, if continuous power is required. The Contractor shall use technical orders, where applicable, and employ good commercial practices in all generator operations, including use of AFMAN 32-1062, applicable UFCs, manufacturer instructions, industry standards, and environmental/occupational safety requirements.
Perform all other position related duties as assigned or requested.
Minimum Position Knowledge, Skills, and Abilities Required:
High school diploma or equivalent training/experience and a valid driver’s license. The technician shall have a minimum of five (5) years’ experience in the electrical power generation field. The technician manages resources and activities devoted to installation, operation, maintenance, and repair of electrical power generating and control systems. The technician shall have knowledge of: Principles of electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low voltage circuits, circuit breakers, switches (automatic/manual type), fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generators, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; grounding practices, environmental policies; principles of management; and operation and repair of electrical power production systems. Experience with operating and maintaining generators ranging from 5 to 4,300 kilowatts desired. All technicians shall be power production journeyman or master technicians.
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.
Work Environment, Physical Demands, and Mental Demands:
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and extreme heat. The employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues.
Other Responsibilities:
Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
The Contractor shall provide OM&R support for all generators, automatic transfer switched (ATS), synchronization gears and light carts, refueling support services to enable refueling of all operational generators on an ongoing basis. The Contractor shall provide inspections, maintenance as required. In addition, the Contractor shall perform facility management and maintenance and repair for fuel systems supporting facility stationery and emergency back-up generators.
Essential Responsibilities:
The Contractor shall use all USG provided generators, transformers, switchgears, fuel tanks, cabling and any other equipment needed to support the government’s requests of spot generators providing prime power for mission requirements. Additionally, in order to minimize mission impact due to power outages caused by routine maintenance or unexpected equipment failure, the Contractor shall utilize USG provided back-up generators to meet the performance objectives of providing reliable and continuous prime power support and no scheduled power outages longer than one (1) hour.
The Contractor shall:
Install, remove, and operate electrical power generating and control systems, automatic or manual transfer switches and associated equipment with proper technical skills.
Check equipment for serviceability; position equipment such as gasoline and diesel engines, generators, switchgear, air compressors, and other power generating auxiliary equipment.
Check installed equipment to ensure compliance with publications, policies, and directives.
Inspect, test, and service component systems such as safety, fuel, lubrication, cooling, and air pressure, pumps, regulators, governors, and accessory equipment.
Observe and interpret instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.
Adjust engine generator systems to maintain proper voltage, current, frequency, and synchronization; synchronize multiple generators when needed.
The Contractor shall operate medium and low voltage generators as required. Operations of the electric generators include start-up, transfer of load, generation, and shutdown of all associated electric power equipment. Operations responsibilities include monitoring and adjusting generator and electrical output performance as required; ensuring adequate stores of fuel are available for continuous operation of the plants; switching operating generators to maintain electrical output while permitting servicing on generators taken off line. Duties include observation of key and critical operational parameters and taking appropriate measures in the event of out-of-tolerance conditions. For locations where generators are providing prime power, performance of these duties must be on a 24-hour a day, 7-day week shift schedule, if continuous power is required. The Contractor shall use technical orders, where applicable, and employ good commercial practices in all generator operations, including use of AFMAN 32-1062, applicable UFCs, manufacturer instructions, industry standards, and environmental/occupational safety requirements.
Perform all other position related duties as assigned or requested.
Minimum Position Knowledge, Skills, and Abilities Required:
High school diploma or equivalent training/experience and a valid driver’s license. The technician shall have a minimum of five (5) years’ experience in the electrical power generation field. The technician manages resources and activities devoted to installation, operation, maintenance, and repair of electrical power generating and control systems. The technician shall have knowledge of: Principles of electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low voltage circuits, circuit breakers, switches (automatic/manual type), fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generators, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; grounding practices, environmental policies; principles of management; and operation and repair of electrical power production systems. Experience with operating and maintaining generators ranging from 5 to 4,300 kilowatts desired. All technicians shall be power production journeyman or master technicians.
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.
Work Environment, Physical Demands, and Mental Demands:
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and extreme heat. The employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues.
Other Responsibilities:
Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
How to apply
To apply for this job you need to authorize on our website. If you don't have an account yet, please register.
Post a resumeSimilar jobs
NOC Application Engineer - IT
Xad Technologies,
Abu Dhabi
1 day ago
Position Title: L1 NOC Application EngineerExperience Level: Minimum 3 Years in Large Industry monitoring using DynatraceLocation: Abu DhabiRole Overview:We are seeking an L1 NOC Application Engineer to join our IT operations team. The ideal candidate will have a foundational understanding of Databases, and application in production environment, with a strong desire to grow and develop their technical skills in a...

Planning Engineer | Joinery and Construction
United Al Saqer Group,
Abu Dhabi
1 day ago
Job DescriptionRoyal Joinery has its own dedicated workshop to assist clients on high-profile projects that require international expertise and a degree of workmanship that eliminates the need to source sub-contractors and third-party furniture suppliers. Our primary focus is on carpentry and woodwork specialties across a wide variety of projects and sectors through the delivery of sophisticated, qualified experts in their...

Inside Sales Engineer
Westinghouse Electric Company,
Abu Dhabi
2 days ago
Welcome to the future of nuclear energy, where Westinghouse Electric Company is leading the field with expertise and innovation to shape the power of tomorrow. At Westinghouse, innovation is in our DNA. We are creative. We think differently. We reimagine the possible across the nuclear industry every day.As a Inside Sales Engineer you will be the Westinghouse Parts Business (WPB)...
