QA/QC Inspector – API Standards
ICM People do Brasil
Date: 2 weeks ago
City: Abu Dhabi
Contract type: Full time
ICM Group is looking for QA/QC Inspector – API Standards.
Location – Abu Dhabi
Experience
6-10 years’ experience on QA-QC activities.
Other Details:-
These roles will require the person to sometimes work in Night Shift (on rotation basis ), so candidates must be open for it.
Location will be Abu Dhabi – sometimes travelling to Dubai, Jebel Ali workshop might be required.
Candidates must have experience in Non-Destructive Testing (NDT) using Liquid penetrant (LPI) and Magnetic Particle (MPI) methods.
We are looking at someone with hands-on experience in quality control, quality assurance, as per the API or ASME standards (depending on the role), experience in dimensional inspection, testing etc. in Fabrication (depending on the role), coating, welding inspection Pressure Vessels, High-Thickness Pressure Vessels, Storage Tanks, Underground Tanks, Welding, Pipeline, Skids etc. The person will be involved in Pre-Job Inspection, preparation of procedure, get approvals, prepare inspection test plan, documentation, coordinate with third party, then will also manage In-Process Inspection, WPS, Welding Inspection etc. Wil prepare reports during the job and after completion of the job as full and final document.
Job Objective
To ensure and maintain the compliance as per IMS procedure, ISO9001:2015, ISO14001:2015, ISO45001:2018, API Q1 Latest Edition, API Q2 Latest Edition, ASME U & R Certification requirements
Key Responsibilities/Duties
IMS, ASME Documentation maintenance – Coordinating with process owner for preparing new/revising procedures, revision control, acquire approval from relevant authority, release of documents, updating document masterlist & shared folder.
Assist in internal audit and supplier audit.
Review of Data-packages, prior to release
Perform dimension inspection, hardness check, NDE-LPI & MPI, Visual inspection, witness load/pressure test, incoming inspection, in-process inspection, final inspection, final clearance, boroscope and generate reports.
Conduct welding inspection [Prior to weld, fit-up, during welding and post weld], prepare and review of welding documents like weld data sheets, weld map, welder continuity, defect ratio analysis, welder performance review and corrective actions, Prepare ITP, as and when required by the projects. Prepare welding related validation file and keep UpToDate.
Conduct inspection, prepare & review of coating inspection reports, prepare coating related validation file and keep UpToDate
Raise NCR, in case of any non-conformance found during inspection and close out in timely manner
Assist on data analysis, prepare reports, and submit for review – Monthly, Quarterly & yearly as per the company policy.
Identify the potential cause for product/process failure during project execution and report to department head
Active participation in contract review and ensure all the customer requirements being met.
Maintenance of QA/QC server and ensure the availability of documents as per company’s retention period.
Follow-up for Internal/external & Audit NCR closure with all relevant departments and update weekly to department head.
Conduct IMS awareness training – Procedures, corrective actions, preventive actions
Any other specific task assigned by department head.
Specialized Knowledge
Familiar with International codes / standards like ASME / API / BS / EN etc is essential.
Requires interpretation of machining drawing & fabrication drawings.
Familiar with Management system implementation
Proficient in MS Office computer packages
Ability and Skills
Internal Auditor – ISO 9001:2015
Certified welding inspector – CSWIP/AWS – preferrable
Certified coating Inspector – BGAS/NACE preferrable
Academic Qualifications
Diploma in any discipline with relevant product/process experience or equivalent
Accountabilities and Performance Measures
Ensure the process control in welding and Coating, improve technicians’ awareness and process compliance
Reduction of NCRs & Customer complaints by taking suitable corrective actions
Better document control
If you meet the above requirements and interested in this role , kindly forward your updated CV + educational certification + passport to [email protected].
Also let us know your salary expectation and availability.
Location – Abu Dhabi
Experience
6-10 years’ experience on QA-QC activities.
Other Details:-
These roles will require the person to sometimes work in Night Shift (on rotation basis ), so candidates must be open for it.
Location will be Abu Dhabi – sometimes travelling to Dubai, Jebel Ali workshop might be required.
Candidates must have experience in Non-Destructive Testing (NDT) using Liquid penetrant (LPI) and Magnetic Particle (MPI) methods.
We are looking at someone with hands-on experience in quality control, quality assurance, as per the API or ASME standards (depending on the role), experience in dimensional inspection, testing etc. in Fabrication (depending on the role), coating, welding inspection Pressure Vessels, High-Thickness Pressure Vessels, Storage Tanks, Underground Tanks, Welding, Pipeline, Skids etc. The person will be involved in Pre-Job Inspection, preparation of procedure, get approvals, prepare inspection test plan, documentation, coordinate with third party, then will also manage In-Process Inspection, WPS, Welding Inspection etc. Wil prepare reports during the job and after completion of the job as full and final document.
Job Objective
To ensure and maintain the compliance as per IMS procedure, ISO9001:2015, ISO14001:2015, ISO45001:2018, API Q1 Latest Edition, API Q2 Latest Edition, ASME U & R Certification requirements
Key Responsibilities/Duties
IMS, ASME Documentation maintenance – Coordinating with process owner for preparing new/revising procedures, revision control, acquire approval from relevant authority, release of documents, updating document masterlist & shared folder.
Assist in internal audit and supplier audit.
Review of Data-packages, prior to release
Perform dimension inspection, hardness check, NDE-LPI & MPI, Visual inspection, witness load/pressure test, incoming inspection, in-process inspection, final inspection, final clearance, boroscope and generate reports.
Conduct welding inspection [Prior to weld, fit-up, during welding and post weld], prepare and review of welding documents like weld data sheets, weld map, welder continuity, defect ratio analysis, welder performance review and corrective actions, Prepare ITP, as and when required by the projects. Prepare welding related validation file and keep UpToDate.
Conduct inspection, prepare & review of coating inspection reports, prepare coating related validation file and keep UpToDate
Raise NCR, in case of any non-conformance found during inspection and close out in timely manner
Assist on data analysis, prepare reports, and submit for review – Monthly, Quarterly & yearly as per the company policy.
Identify the potential cause for product/process failure during project execution and report to department head
Active participation in contract review and ensure all the customer requirements being met.
Maintenance of QA/QC server and ensure the availability of documents as per company’s retention period.
Follow-up for Internal/external & Audit NCR closure with all relevant departments and update weekly to department head.
Conduct IMS awareness training – Procedures, corrective actions, preventive actions
Any other specific task assigned by department head.
Specialized Knowledge
Familiar with International codes / standards like ASME / API / BS / EN etc is essential.
Requires interpretation of machining drawing & fabrication drawings.
Familiar with Management system implementation
Proficient in MS Office computer packages
Ability and Skills
Internal Auditor – ISO 9001:2015
Certified welding inspector – CSWIP/AWS – preferrable
Certified coating Inspector – BGAS/NACE preferrable
Academic Qualifications
Diploma in any discipline with relevant product/process experience or equivalent
Accountabilities and Performance Measures
Ensure the process control in welding and Coating, improve technicians’ awareness and process compliance
Reduction of NCRs & Customer complaints by taking suitable corrective actions
Better document control
If you meet the above requirements and interested in this role , kindly forward your updated CV + educational certification + passport to [email protected].
Also let us know your salary expectation and availability.
How to apply
To apply for this job you need to authorize on our website. If you don't have an account yet, please register.
Post a resumeSimilar jobs
Staff Nurse-Tower B5 - Medical Wing
Sheikh Shakhbout Medical City - SSMC,
Abu Dhabi
1 hour ago
Job Purpose JOB DESCRIPTION The Staff Nurse is accountable for the coordination of nursing care, including direct patient care, patient/family education and transitions of care. The Staff Nurse supports professional nursing practice across the continuum of care to meet the needs of the patient and family. The Staff Nurse will understand, support and promote the mission, vision and values of...
Staff Nurse-Tower A8 - VIP Wing
Sheikh Shakhbout Medical City - SSMC,
Abu Dhabi
2 hours ago
Job Purpose JOB DESCRIPTION The Staff Nurse is accountable for the coordination of nursing care, including direct patient care, patient/family education and transitions of care. The Staff Nurse supports professional nursing practice across the continuum of care to meet the needs of the patient and family. The Staff Nurse will understand, support and promote the mission, vision and values of...
Wet Utilities Inspector
GHD,
Abu Dhabi
15 hours ago
Job DescriptionWith more than 14000 people around the globe, GHD is one of the world’s leading professional services companies operating in the global markets of water, energy and resources, environment, property and buildings, and transportation. Serving clients across five continents and the Pacific region, GHD people share a passion for exceeding the expectations of our clients and contributing to their...
